Professional introduction of 30kW high-power solar inverter

This 30kW industrial-grade solar inverter has a conversion efficiency of Greater than or equal to 85%. The device supports an open-circuit voltage input of up to 650V and is equipped with a 100A high-current MPPT controller. 240V voltage meets different industrial power needs.

Continuous output power: 30kW
Peak power: 90kW (lasting 10 seconds)
<1.5%)

Industrial and commercial rooftop photovoltaic: suitable for 200-500㎡ installation area

Microgrid system: can form an off-grid power supply network

Electric vehicle charging station: matched with 120kW DC fast charging pile power supply

Photovoltaic modules: 72 pieces of 390W bifacial modules (28.08kW)
Using 6 strings and 12 parallel wiring method
Single string parameters: Voc=645V, Vmp=550V, Imp=9.5A
MPPT controller: 100A/650V input
Energy storage battery: 240V 500Ah lithium battery system (120kWh)

Power distribution system: 400A DC circuit breaker + 300A AC cabinet

Local peak sunshine hours: 4.5 hours System efficiency coefficient: • Component attenuation: 97% • Line loss: 98% • MPPT efficiency: 99% • Inverter efficiency: 85%

Daily average power generation: 28kW × 4.5h × 97% × 98% × 99% ×85%=101kWh

Load capacity analysis: Can drive simultaneously: • 15kW central air conditioning system • 7.5kW water pump unit • 5kW lighting system The energy storage system can maintain critical load operation for 8 hours

high power inverter